Gemini Farms- Top Quality!

2012 JD 6190R w/ 11,796hrs, 25spd Quad Range trans, foot throttle, 3 remotes, 540/1000pto, 3pt w/ toplink, 480/8R46 rear tires, 420/85R30 front tires, front fender, 8 front weights, SN#1RW6190RCCA001790
2014 JD 6150M w/ 12,385hrs, 20spd Quad Range trans, 4wd, cab w/ heat/ air, 3 remotes, foot throttle, small 1000pto, 3pt w/ toplink, 480/80R42 rear tires, 16.9R28 front tires, front fenders, 6- front weights, SN#1L061500MLEGB08358
1992 JD 4960 w/ 5,092hrs, 15spd Power Shift, 4wd, 3 remotes, large 1000pto, 3pt. hammer strap, 520/85R42 rear bolt-on duals, 420/90R30 front tires, front fenders, SN#RW4960P001004
JD 4960 w/ 5,431hrs, 15spd Power Shift, 4wd, cab w/ heat/ air, large 1000pto, 3pt, 3 remotes, 18.4R46 rear bolt on duals, 16.9R30 front tires, SN#RW4960P002688
1990 JD 4455 w/ 1895hrs, cab w/ heat/ air, newer interior, Power Shift 15spd trans, 3pt, 3 remotes, 540pto, 520/85R38 rear tires, 380/85R28 front tires, front fenders, 10 front weights, mint condition, SN#RW4455P005827
1990 JD 4455 w/ 3100hrs, cab w/ heat/ air, newer interior, Power Shift 15spd trans, 4wd, 3 remotes, 540/ 1000pto, rear wheel weights, 10 front weighs, 520/85R38 rear tires, 380/85R28 front tires, front fenders, SN#RW4455P005142
1984 JD 4450 w/ 2015hrs showing, cab w/ heat/ air, 15spd Power Shift trans, 4wd, 3 remotes, 3pt, 520/85R38 rear tires, 420/85R26 front tires, 10-front weights, front fenders, SN#RW4450P014122
JD 4450 w/ 9093hrs, cab w/ heat/ air, 15spd Power Shift trans, 4wd, 3 remotes, 540/ 1000pto, 20.8R38 rear tires, 16.9R26 front tires, front fenders, 6 front weights
1982 JD 4240 w/ 787hrs showing, 16spd Quad Range, 2wd, cab w/ heat/ air, 2 remotes, 3pt, 540/1000pto, 8 front weights, 18.4R38 rear tires
1982 JD 4240 w/ 2,000hrs showing, 16 spd Quad Range trans, 2wd, 4 post canopy, 2 remotes, 3pt, 540/1000pto, 18.4R38 rear tires, SN#4240W036499R
1982 JD 4240 w/ 6,654hrs, 8spd Power Shift trans, 2wd, 4 post canopy, 2 remotes, 540/1000pto, 3pt, 18.4R38 rear tires, wheel weights, SN#4240P029010RW
1980 JD 4240 w/ 1897hrs, 16spd Quad Range, OROPS, 2 remotes, 3pt, small 1000pto, 20.8-30 rear tires
1970 JD 4520 w/ JD 725 loader, 895hrs showing, diesel, 8spd Power Shift trans, OROPS, 2wd, 3pt, small 1000pto, 2 remotes, 520/85R38 rear tires, 91” bucket
1970 JD 4520 w/ 5323hrs, OROPS, Synchro shift 8spd trans, diesel, 2 remotes, small 1000pto, 3pt w/ toplink, 20.8-38 rear tires
1971 JD 4320 w/ 9263hrs, 8spd Synchro Shift trans,OROPS, 2wd, 2 remotes, 540/1000pto, 3pt
1948 JD A pulling tractor w/ 2cyl gas, 1 remote, 540pto, front weights bracket, 14.9-38 rear tires
1948 JD B pulling tractor w/ 2cyl gas engine, 540pto, rear wheel weights, front weight bracket, wheel bars
Manitou MLT940 telehandler w/ 6,308hrs, 3 position steering, cab, hyd quick att, rear hitch, bucket, bunker claw defacer
Landoll 2110 13 shank HD chisel plow w/ 21” front blades, 4′ shovel, rear leveling bar
Kverneland BB115 6 bottom plow w/ adjustable width, 2pt hookup, hyd side hill hitch, 12”-20” width
JD 2 bottom trailer plow w/ steel rear wheel, hyd raise & lower
JD 3 bottom trailer plow w/ hyd raise/ lower, rubber wheel tire
1990 JD 30′ air seeder w/ 7.5” spacing, Gandy Orbit 62DS12F air system, 4000# seed tank, scales, rear hyd, recently rebuilt, SN#A01990D730389
Big Foot 3207 3pt 7 wheel packer w/ stands & concrete blocks, SN#0058
Big Foot 3209 3pt 9 wheel packer w/ stands & concrete blocks, SN#0062
2011 JD 9870 STS combine w/ 4280/ 2741hrs, 2spd hydro, 4wd, lateral tilt, self leveling sieves, manual bin ext, single point hyd hookup, 2-pto’s, 520/85R42 front duals, 750/65R26 rear tires, rear axle weights, power tail board, chopper, SN#1H09870SBU741368
2012 JD 635F 35′ grain platform w/ single point hookup, SN#H00635F725812
2012 JD 625F 25′ flex grain head w/ air reel, single point hyd hookup, 2-pto’s, rebuilt in 2026, new floor, SN#1H00625FCC0755189
Houle 8”x 30” transport auger w/ elect motor
Sukup 8”x 25′ auger w/ Weg motor
Sukup 8”x 24′ transport auger w/ elect motor
JD 388 28′ butterfly mower w/ tine conditioners, large 1000pto, SN#1XF0388XCBC287643 & JD 131 10′ front mower w/ tine conditioners, large 1000pto
NH BB9060 big square baler w/ 6′ pickup head,  49,850 bales, large 1000pto, tandem axle, 3×3 bales, inoculant applicator, rear hyd ramp, last bale eject, rear steering axle, 500/50-17 tires, SN#244728027
Vermeer TE330 6 star tedder w/ hyd front fold, road lights, 540pto, transport wheels, new driveline & gear box
3- 10’x 16′ HD metal rack wagons w/ Kory 6892 running gear, 11L15 tires w/ 6 bolt rims, expanded steel floor
Miller Pro 2250 rake hitch w/ 2- Miller Pro 1150 11′ rakes, 22′ swath, 540pto driven hyd pump
Roto-Grind 1090 bale chopper w/ small 1000pto, manual spout, extra hammers, rebuilt hyd pump & pto in 2025, SN#3439044
Tubeline Bale Boss skid mount bale grinder w/ LH discharge
Case 660 IH forage blower w/ auger feed, 540pto
2004 Western Star 4900 10-wheeler w/ 156,589mi, USA 26′ silage /grain body, Eaton 8LL 18spd trans, Mercedes 450hp engine, 46K rears, 20L front axles, full lockers, cruise control
2005 Ford F350 dually dump truck w/ 56,076mi showing, 5spd manual trans, 6.0L Power Stroke, 9′ dump bed, new hoist, rear brakes, rotors & fuel tank, rebuilt  trans
1990 International 4900 6 wheeler w/ 62,917mi, Eaton 10spd manual trans, single axle, 17′ steel dump, no tailgate
2014 Houle 7300gal manure tank w/ tri axle, hyd steering, 6” discharge, low spread, large 1000pto, 725/65-26 tires, SN#CAI1-1408911
1989 Delta 98”x 22′ deck between trailer w/ pintle hitch, flip down ramps, tandem axle, 10,000#GVWR
94”x 22′ Flatbed dump wagon w/ dual wheels, tandem axle, dual dump cylinders
2-Ferris IS500 zero turns w/ Cat 3013 3cyl diesel engine, 72” deck, 1304hrs & 1,110hrs
2-5500gal Upright poly tank w/ 2” outlets, Banjo ball valve
Large amount of treated fence posts
Large amount of gates
55- Poly calf hutches
2-Super calf hutches
Skid loader buckets
Skid loader tires
Misc electric motors & hyd cylinders
Roll tarps & handles for 18′ dump truck
Phiber 3 bale accumulator for NH baler
Harvest Tec 560 inoculant applicator
60gal Poly tank & pump
8-Partz small bale bedding choppers
Poly auger hopper
Corn Planter CCS 1bu hoppers w/ precision finger pickup, JD radial bean meters
Truck foldable fert 4” auger
Buzz Box arc welder
And expect Lots more equipment as they go through there shops..

ALL ITEMS SELL AS IS WHERE IS

Internet Premium: 3% across the board for everything bought online
Buyers Premium: 0% Buyer’s premium $1,001 and over. 10% Buyer’s premium $1000 and under.
Participation Requirements: Valid Credit Card required for bidding approval
Payment Options: Cash, check, card, wire transfer, or ACH
Payment Instructions:

1. As soon as the auctioneer announces "sold", the buyer with the highest bid then becomes the full & rightful owner & it becomes his full responsibly. J Martin Auctions LLC has a right to accept or reject any and all bids due to any reasons. We are not responsible for any missed bids. We are not responsible for any damage to the item before or after it has been sold.
2. All items sell as is, where is. J Martin Auctions LLC & all its employees make every effort to describe eq accurately, but we are not responsible for any errors or misrepresentations made by employees or seller. It is my responsibility, as the buyer, to inspect any and all eq for auction prior to purchase.
3. I, as the buyer, verify that I have inspected all items that I am purchasing, or that I have waived my opportunity to inspect items prior to purchase.
4. I agree to hold J Martin Auctions LLC harmless from and against all claims, liabilities, costs, and expenses, including legal fees, relating to the condition or use of articles purchased or failure of user to follow instructions, warnings, or recommendations of the manufacturer.
5. There is no warranty or merchantability on any and all items expressed or implied, by auctioneer, employee, or seller.
6. J Martin Auctions LLC cannot verify that any hours or years on listed equipment are verified or correct.
7. J Martin Auctions LLC is not responsible for used or new equipment sold without the original owners’ manual or safety eq. Equipment purchased may not incorporate approved activating mechanisms of operation safety devices. It is the buyer’s responsibility that articles purchased are so equipped and safeguard to any and all requirements before placing in operation.
8. Purchases will not be released until the invoice is paid in full.
9. We accept cash, check, credit card, & wire transfer as payment. 3.5% Credit card convenience fee. $25 wire transfer fee. Out-of-state checks must have a bank letter of guarantee if over $100,000. $50 title handling fee for every titled item (reg or title).
10. 8% County/State Sales tax will be charged on invoice total unless an acceptable sales tax exemption form is filed or is a titled vehicle or trailer going out of state.
11. There is a 5day removal on all items unless special arrangements have been made. After 5 days, J Martin Auctions LLC will consider the item abandoned and the item will become property of J Martin Auctions. All small items need to be picked up the day of or within 2 business days after the auction. Any small item that goes missing after the auction J Martin Auctions is not responsible and will not be refunding your money.
    There is a $50 fee per item that needs to be palletized

J Martin Auctions will ping the card that you enter at the time of registration to verify that it is valid and has funds in the card. The ping amount will be $200. (this charge will fall off your card w/ in 5 days)

If you fail to satisfy the terms of the auctions, J Martin Auctions is authorized to collect the total of your invoice on the credit card you entered at the time of sign up. If your purchases are under $1,000 and no payment arrangements have been made within 3 days, we are authorized to charge your card for your invoice total. Should your invoice total over $1000, J Martin Auctions will collect $1000 within three days with no confirmation of payment, & the remaining invoice total will be charged by 5 business days.
J Martin Auctions is authorized to sell purchased items with no payment at auction time or any auction or private treaty to collect funds for payment. All money collected will go towards item and storage fees.


Currency Type: USD
Shipping Instructions: The buyer is responsible for all shipping/trucking for their purchased items.
Preview Date & Times: Items can be previewed at the auction address from 3 days before the auction to the day before the auction
Checkout Date & Times: Please contact the auction company for checkout dates & times.
Main Office: 1036 New York 318, Waterloo, NY 13165
Further terms

1. By making a bid, Bidder accepts the terms and conditions & payment, and removal terms and will be bound by them.
2. Auction Catalog is guide-only. J Martin Auctions LLC reserves the right to group lots, reduce or add quantity to lots, add lots, or delete lots.
3. Announcements made the day of the sale take precedence over written or advertised announcements- but do not alter, in any way, the terms and conditions of the sale.
4. By agreeing and/or signing to these listed terms of the auction you are held to them, and they cannot be altered in any way unless by written notice from J Martin Auctions LLC signed by President or Business Manager.

Account user is responsible for all bids placed- whether intentional or unintentional & is responsible for all users on his account. After a bid is placed, it is non-refundable.

1. The record of sales kept by the auctioneer and clerk will be taken as final.
2. J Martin Auctions is not responsible for any discrepancies and/or internet shortage by the online program. The online bidding program is just a offered service and is in no way guaranteed to be accurate, working, & correct.
3. Please contact J Martin Auctions LLC at 315.856.8447 or info@jmartinauctions.com with any questions.